Quick Login

Author Topic: My Version of VE7SL's Micronout. "THE MOUSER-40" 1 Transistor CW 40m Transmitter  (Read 6216 times)

Offline KN2A

  • Leading Rate
  • *
  • Posts: 5
  • Country: us
Hello everyone.
Afew days ago I ran into a 1 Transistor CW Transmitter Circuit in VE7SL's Radio Notebook. You can search the net for his site.

Well I looked around in my parts draws and found all the components... except a PCB to experiment on.

I went to the hardware store and bought a few Mouse Traps and used the wood of the Mouse Trap. I pasted the schematic of the circuit on the board, nailed in a few small nails and soldered everything together.

IT WORKED IT WORKED! Attached is a picture of it and more info and videos on my QRZ page.

I added a small strip of aluminum as a straight Key and also a variable resistor for the emitter in order to increase or decrease the power. L1 is a 22uH winded torroid. All other values are the same as recommended by VE7SL in his page.

I contacted Steve VE7SL and he was very pleased and happy with my idea of the mouse trap and  told me to name it THE MOUSER-40.

Yesterday I almost made a contact with it. I called CQ and someone came back but I could not decipher the callsign because of QRM but I know he heard me with my full 359mW! SKCC Sprint was on also so it was difficult.

Oh boy is this QRPp so much fun.

I plan to get a larger Mousetrap and add a few things to it.

I hope you all enjoy looking at the creation and perhaps build your own.
Will update my contacts with it regularly.

72/73 de Joe KN2A

Offline GM0LVI

  • Admiral
  • *
  • Posts: 423
  • Country: scotland
Joe - That's just brilliant!!
Dave

Offline KN2A

  • Leading Rate
  • *
  • Posts: 5
  • Country: us
Hi Dave!
Thanks for checking it out.
Nice QRZ page and pictures you have. Great equipment by far!

My XYL tells me " Tuna Cans, Spam Cans, Altoids cans and now a Mouse Trap... whats next? Your NUTS!"
I tell her "Yes I am ... NUTS FOR YOU". She then HUGS ME!  Hi Hi!

Hope we can make a contact one day maybe KX3 TO KX3!

73 Dave

Joe

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
I love it! Now that is ham radio at its best! Maybe a rat trap for a tube rig or a mopa version of your mouser.  I am going to check distances . Maybe you're close enough.
don
283 miles. Might be a stretch. What crystal are you running?

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
Joe, look what you made me do! Thanks for the idea! They make an excellent built board. The reworked mouse trap also makes an excellent key. Better then one might think.
don VE3LYX

Offline AK0B

  • Leading Rate
  • *
  • Posts: 8
  • Country: us
I really enjoyed seeing the pictures of KN2A little rig.  I would like to see more projects you-all are building.

Also the operating results of DIY QRP rigs.  Hope in a week or so to publish some of my activity on the work bench.

The cost to build a simple direct conversion receiver or stable transmitter is really cheap.  Now days it
cost more for the coax from the antenna to the shack than all the parts to build a DIY station.

Stan AK0B

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
Today I built a micronaut on a perfboard. I used a PNP 2N2095A because I have several. I wish it had a bit more power but it is a nice working clean sounding rig. I used a 35795 khz crystal and have been trying it now and then this afternoon.
don VE3LYX